Release SyncVito 1.0.9

CHANGELOG.md

@@ -1,5 +1,40 @@
 # Änderungsprotokoll
 
+## 1.0.9 – 2026-09-24
+
+### Behoben
+
+- Beim Start einer Synchronisation wird die Fortschrittsanzeige sofort zurückgesetzt. Bereits beim Einlesen von Quelle und Ziel erscheinen der aktuelle Ordner und die Anzahl gefundener Dateien; eine vorherige Updateanzeige bleibt nicht mehr unverändert stehen.
+- Der Gesamtstatus kennzeichnet einen laufenden Vorgang eindeutig mit „Synchronisierung läuft“.
+- Windows-Verzeichnisverknüpfungen (Junctions) werden beim Einlesen übersprungen, damit insbesondere AppData nicht mehrfach oder zyklisch durchsucht wird.
+- Bei einer Unterauswahl werden nicht ausgewählte Verzeichniszweige nicht mehr vollständig durchsucht.
+
+## 1.0.8 – 2026-09-24
+
+### Behoben
+
+- Der Updatewächter wartet zusätzlich zu den auslösenden PyInstaller-Prozessen auf weitere Instanzen derselben installierten Anwendung. Solange diese noch laufen, wird der Installer nicht gestartet.
+- Das tatsächliche Ende des Installers und sein Exitcode werden zuverlässig erfasst. Der Wächter wartet dabei nicht auf die anschließend neu gestartete Anwendung.
+- Abgebrochene Installationen und weiterhin laufende Instanzen werden protokolliert und beim nächsten Programmstart mit der tatsächlich gestarteten Version angezeigt.
+- Installations- und Protokollpfade mit Leerzeichen oder Apostrophen werden beim Aufruf des Installers korrekt übergeben.
+
+## 1.0.7 – 2026-09-24
+
+### Behoben
+
+- Bei gesperrten Dateien, etwa in AppData, zeigt SyncVito eine kompakte Zusammenfassung und kennzeichnet die Sicherung als unvollständig. Vollständige Dateipfade und bekannte Sperrprozesse erscheinen im Protokoll.
+- Fehlende Zugriffsrechte werden von tatsächlichen Dateisperren unterschieden; zusätzliche Fehler bleiben auch bei teilweise blockierten Sicherungen sichtbar.
+- Die Sperrerkennung berücksichtigt die tatsächlich betroffene Quell- oder Zieldatei und verarbeitet Windows-Dateihandles und Fehlercodes korrekt.
+- Automatische Wiederholungsversuche starten bereits nach Freigabe einzelner Dateien und berücksichtigen alle bereitstehenden Aufgaben.
+- Während eines erneuten Synchronisationslaufs bleibt dessen Aktivität im Gesamtstatus sichtbar.
+
+## 1.0.6 – 2026-09-24
+
+### Behoben
+
+- Dateianzeige und Fortschrittsleiste besitzen nun feste Breiten und verschieben sich beim Wechsel zwischen unterschiedlich langen Dateipfaden nicht mehr.
+- Lange Dateipfade werden platzsparend gekürzt; der vollständige Text bleibt als Tooltip verfügbar.
+
 ## 1.0.5 – 2026-09-24
 
 ### Neu

pyproject.toml

@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
 
 [project]
 name = "syncvito"
-version = "1.0.5"
+version = "1.0.9"
 description = "Windows-Desktopwerkzeug für lokale und NAS-Synchronisation"
 readme = "README.md"
 requires-python = ">=3.11"

src/syncvito/coordinator.py

@@ -25,12 +25,12 @@ def derive_overall_status(
     if TaskRuntimeState.ERROR in states:
         return "error", "Fehler"
     if TaskRuntimeState.WAITING_FOR_RELEASE in states:
-        return "error", "Wartet auf Dateifreigabe"
+        return "error", "Synchronisierung läuft" if running else "Unvollständig – Dateien gesperrt"
     if globally_paused:
         return "paused", "Pausiert"
     if TaskRuntimeState.ACTIVE not in states:
         return "paused", "Inaktiv"
-    return "active", "Synchronisiert" if running else "Bereit"
+    return "active", "Synchronisierung läuft" if running else "Bereit"
 
 
 class _WorkerSignals(QObject):
@@ -186,6 +186,7 @@ class SyncCoordinator(QObject):
             self._start_next()
             return
         self._running_task_id = task_id
+        self.progress_changed.emit(0, f"{task.name}: Synchronisation wird gestartet …")
         self.idle_changed.emit(False)
         self._emit_overall_status()
         self.log_created.emit(task.name, "Start", "Synchronisation gestartet.")
@@ -205,25 +206,31 @@ class SyncCoordinator(QObject):
         if result.blocked:
             paths = [blocked.path for blocked in result.blocked]
             self._retry_tasks[task_id] = paths
-            descriptions: list[str] = []
-            for blocked in result.blocked:
-                names = ", ".join(f"{process.name} (PID {process.pid})" for process in blocked.processes)
-                descriptions.append(f"{blocked.path.name}: {names or 'sperrender Prozess nicht ermittelbar'}")
-            message = "Zurückgestellt – " + "; ".join(descriptions)
+            message = (
+                f"{result.copied} kopiert, {len(result.blocked)} Dateien gesperrt – Sicherung unvollständig. "
+                "Andere Dateien wurden weiterverarbeitet. Automatischer Wiederholungsversuch nach Freigabe; "
+                "ggf. betroffene Programme schließen. Details im Protokoll."
+            )
             self._lock_messages[task_id] = message
             self._emit_lock_summary()
             self.log_created.emit(task.name, "Blockiert", message)
+            for blocked in result.blocked:
+                names = ", ".join(f"{process.name} (PID {process.pid})" for process in blocked.processes)
+                self.log_created.emit(
+                    task.name, "Blockiert", f"{blocked.path}: {names or 'sperrender Prozess nicht ermittelbar'}"
+                )
             self._set_task_state(task_id, TaskRuntimeState.WAITING_FOR_RELEASE)
-        elif result.errors:
-            self._retry_tasks[task_id] = []
-            self._lock_messages.pop(task_id, None)
-            self._emit_lock_summary()
-            self.log_created.emit(task.name, "Fehler", " | ".join(result.errors[:5]))
-            self._set_task_state(task_id, TaskRuntimeState.ERROR)
         else:
-            self._retry_tasks.pop(task_id, None)
             self._lock_messages.pop(task_id, None)
             self._emit_lock_summary()
+        if result.errors:
+            # Auch zusätzliche Fehler eines teilweise blockierten Laufs sichtbar halten.
+            self._retry_tasks[task_id] = []
+            for error in result.errors:
+                self.log_created.emit(task.name, "Fehler", error)
+            self._set_task_state(task_id, TaskRuntimeState.ERROR)
+        elif not result.blocked:
+            self._retry_tasks.pop(task_id, None)
             summary = f"{result.copied} kopiert, {result.deleted} gelöscht, {result.conflicts} Konfliktkopien"
             self.log_created.emit(task.name, "Erfolg", summary)
             self._set_task_state(task_id, TaskRuntimeState.ACTIVE)
@@ -273,13 +280,12 @@ class SyncCoordinator(QObject):
         if self.config.settings.paused or self.is_running:
             return
         for task_id, paths in list(self._retry_tasks.items()):
-            if paths and any(is_file_locked(path) for path in paths):
+            if paths and all(is_file_locked(path) for path in paths):
                 continue
             self.log_created.emit(
                 "Automatischer Versuch", "Hinweis", "Blockierte oder nicht erreichbare Datei wird erneut geprüft."
             )
             self.enqueue(task_id)
-            break
 
     def _task(self, task_id: str) -> SyncTask | None:
         return next((task for task in self.config.tasks if task.id == task_id), None)
@@ -296,4 +302,8 @@ class SyncCoordinator(QObject):
         self.overall_status_changed.emit(status, text)
 
     def _emit_lock_summary(self) -> None:
-        self.lock_changed.emit("\n".join(self._lock_messages.values()))
+        messages = list(self._lock_messages.values())
+        summary = "\n".join(messages[:2])
+        if len(messages) > 2:
+            summary += f"\nWeitere {len(messages) - 2} Aufgaben mit gesperrten Dateien. Details im Protokoll."
+        self.lock_changed.emit(summary)

src/syncvito/file_locks.py

@@ -23,7 +23,22 @@ def is_file_locked(path: Path) -> bool:
     """Prüft eine vorhandene Datei durch exklusives Öffnen ohne Schreibzugriff."""
     if not path.exists() or os.name != "nt":
         return False
-    handle = ctypes.windll.kernel32.CreateFileW(
+    kernel32 = ctypes.WinDLL("kernel32", use_last_error=True)
+    create_file = kernel32.CreateFileW
+    create_file.argtypes = [
+        wintypes.LPCWSTR,
+        wintypes.DWORD,
+        wintypes.DWORD,
+        ctypes.c_void_p,
+        wintypes.DWORD,
+        wintypes.DWORD,
+        wintypes.HANDLE,
+    ]
+    create_file.restype = wintypes.HANDLE
+    close_handle = kernel32.CloseHandle
+    close_handle.argtypes = [wintypes.HANDLE]
+    close_handle.restype = wintypes.BOOL
+    handle = create_file(
         str(path),
         0x80000000,
         0,
@@ -34,8 +49,8 @@ def is_file_locked(path: Path) -> bool:
     )
     invalid_handle = ctypes.c_void_p(-1).value
     if handle == invalid_handle:
-        return ctypes.get_last_error() in {5, 32, 33}
-    ctypes.windll.kernel32.CloseHandle(handle)
+        return ctypes.get_last_error() in {32, 33}
+    close_handle(handle)
     return False
 
 

src/syncvito/main_window.py

@@ -7,7 +7,7 @@ from datetime import datetime
 from pathlib import Path
 
 from PyQt6.QtCore import QEvent, Qt, QTimer, pyqtSignal
-from PyQt6.QtGui import QAction, QCloseEvent, QFontDatabase
+from PyQt6.QtGui import QAction, QCloseEvent, QFontDatabase, QResizeEvent
 from PyQt6.QtWidgets import (
     QAbstractItemView,
     QApplication,
@@ -50,6 +50,35 @@ __all__ = ["MainWindow"]
 
 UPDATE_CHECK_INTERVAL_MS = 30 * 60 * 1000
 UPDATE_RETRY_INTERVAL_MS = 60 * 1000
+PROGRESS_TEXT_WIDTH = 300
+PROGRESS_BAR_WIDTH = 450
+
+
+class _ElidedLabel(QLabel):
+    """Hält dynamische Texte in einer festen Breite vollständig zugänglich."""
+
+    def __init__(self, text: str = "", parent: QWidget | None = None) -> None:
+        super().__init__(parent)
+        self._full_text = ""
+        self.setText(text)
+
+    def setText(self, text: str) -> None:  # noqa: N802 - Qt API
+        self._full_text = text
+        self.setToolTip(text)
+        self.setAccessibleName(text)
+        self._refresh_elided_text()
+
+    def resizeEvent(self, event: QResizeEvent) -> None:  # noqa: N802 - Qt API
+        super().resizeEvent(event)
+        self._refresh_elided_text()
+
+    def _refresh_elided_text(self) -> None:
+        visible_text = self.fontMetrics().elidedText(
+            self._full_text,
+            Qt.TextElideMode.ElideMiddle,
+            max(0, self.contentsRect().width()),
+        )
+        super().setText(visible_text)
 
 
 class MainWindow(QMainWindow):
@@ -65,7 +94,7 @@ class MainWindow(QMainWindow):
         self._notified_update_version: str | None = None
         self.setWindowTitle("SyncVito")
         self.setWindowIcon(app_icon())
-        self.setMinimumSize(980, 680)
+        self.setMinimumSize(1040, 680)
         self.resize(1220, 800)
 
         self.coordinator = SyncCoordinator(config, config_store, self)
@@ -85,6 +114,7 @@ class MainWindow(QMainWindow):
         self.update_retry_timer.setInterval(UPDATE_RETRY_INTERVAL_MS)
         self.update_retry_timer.timeout.connect(self._automatic_update_check)
         QTimer.singleShot(3000, self._automatic_update_check)
+        QTimer.singleShot(1000, self._show_previous_update_error)
         cleanup_attempts = 6 if "--updated" in sys.argv else 1
         QTimer.singleShot(3000, lambda: self._cleanup_update_installers(cleanup_attempts))
         if "--updated" in sys.argv:
@@ -380,15 +410,17 @@ class MainWindow(QMainWindow):
         dock.setFixedHeight(66)
         layout = QHBoxLayout(dock)
         layout.setContentsMargins(28, 12, 28, 12)
-        self.progress_text = QLabel("Bereit")
-        self.progress_text.setMinimumWidth(250)
+        self.progress_text = _ElidedLabel("Bereit")
+        self.progress_text.setFixedWidth(PROGRESS_TEXT_WIDTH)
         self.progress_text.setProperty("muted", True)
         self.progress_bar = QProgressBar()
+        self.progress_bar.setFixedWidth(PROGRESS_BAR_WIDTH)
         self.progress_bar.setRange(0, 100)
         self.progress_bar.setValue(0)
         self.progress_bar.setFormat("%p %")
         layout.addWidget(self.progress_text)
-        layout.addWidget(self.progress_bar, 1)
+        layout.addWidget(self.progress_bar)
+        layout.addStretch(1)
         return dock
 
     def _build_tray(self) -> None:
@@ -635,6 +667,16 @@ class MainWindow(QMainWindow):
         self._append_log("Update", "Erfolg", message)
         self.tray.showMessage("SyncVito aktualisiert", message, QSystemTrayIcon.MessageIcon.Information, 5000)
 
+    def _show_previous_update_error(self) -> None:
+        message = self.updater.service.take_install_error()
+        if message:
+            self._append_log("Update", "Fehler", message)
+            QMessageBox.warning(
+                self,
+                "Update nicht abgeschlossen",
+                f"{message}\n\nGestartete Version: {__version__}\nProtokolle: {self.updater.service.update_directory}",
+            )
+
     def _cleanup_update_installers(self, attempts_remaining: int = 1) -> None:
         _removed, pending = self.updater.service.cleanup_installers()
         if pending and attempts_remaining > 1:

src/syncvito/sync_engine.py

@@ -4,13 +4,15 @@ from __future__ import annotations
 
 import os
 import shutil
+import stat
 from collections.abc import Callable
 from contextlib import suppress
 from dataclasses import dataclass, field
 from datetime import datetime
 from pathlib import Path
+from time import monotonic
 
-from syncvito.file_locks import LockingProcess, find_locking_processes
+from syncvito.file_locks import LockingProcess, find_locking_processes, is_file_locked
 from syncvito.models import ConflictMode, DeleteMode, SyncDirection, SyncTask
 from syncvito.state_store import StateStore
 
@@ -89,9 +91,13 @@ class SyncEngine:
         task.validate()
         source_root = Path(task.source)
         target_root = Path(task.target)
+        if progress:
+            progress(0, f"{task.name}: Ordner werden geprüft …")
         self._validate_roots(source_root, target_root)
-        source_files, source_dirs = self._inventory(source_root, task.selected_paths)
-        target_files, target_dirs = self._inventory(target_root, task.selected_paths)
+        source_files, source_dirs = self._inventory(source_root, task.selected_paths, progress, "Quelle")
+        target_files, target_dirs = self._inventory(target_root, task.selected_paths, progress, "Ziel")
+        if progress:
+            progress(0, f"{task.name}: Änderungen werden verglichen …")
         previous = self.state_store.get(task.id)
 
         if task.direction is SyncDirection.ONE_WAY:
@@ -117,12 +123,20 @@ class SyncEngine:
         for index, operation in enumerate(operations, start=1):
             try:
                 self._execute(operation, result)
-            except PermissionError as exc:
-                processes = tuple(find_locking_processes(operation.target))
-                result.blocked.append(BlockedFile(operation.target, processes))
-                result.errors.append(f"Zugriff verweigert: {operation.target} ({exc})")
             except (OSError, shutil.Error) as exc:
-                result.errors.append(f"{operation.target}: {exc}")
+                failed_path = (
+                    Path(exc.filename2 or exc.filename)
+                    if isinstance(exc, OSError) and (exc.filename2 or exc.filename)
+                    else operation.target
+                )
+                blocked_path = _blocked_path(operation, exc)
+                if blocked_path is not None:
+                    processes = tuple(find_locking_processes(blocked_path))
+                    result.blocked.append(BlockedFile(blocked_path, processes))
+                elif isinstance(exc, PermissionError):
+                    result.errors.append(f"Zugriff verweigert: {failed_path} ({exc})")
+                else:
+                    result.errors.append(f"{failed_path}: {exc}")
             if progress:
                 detail = f"{operation.kind}: {operation.relative}"
                 progress(round(index / total * 100), detail)
@@ -149,15 +163,31 @@ class SyncEngine:
             raise UnavailablePathError(f"Ziel ist kein Ordner: {target_root}")
 
     @staticmethod
-    def _inventory(root: Path, selected_paths: list[str]) -> tuple[dict[str, FileRecord], set[str]]:
+    def _inventory(
+        root: Path,
+        selected_paths: list[str],
+        progress: ProgressCallback | None = None,
+        label: str = "Ordner",
+    ) -> tuple[dict[str, FileRecord], set[str]]:
         files: dict[str, FileRecord] = {}
         directories: set[str] = set()
         selections = tuple(Path(item).parts for item in selected_paths)
+        last_report = monotonic()
+        if progress:
+            progress(0, f"{label} wird eingelesen: {root}")
         try:
             for current, dir_names, file_names in os.walk(root):
                 current_path = Path(current)
                 relative_dir = current_path.relative_to(root)
-                dir_names[:] = [name for name in dir_names if not (current_path / name).is_symlink()]
+                dir_names[:] = [
+                    name
+                    for name in dir_names
+                    if _is_selected((relative_dir / name).parts, selections)
+                    and not _is_directory_link(current_path / name)
+                ]
+                if progress and monotonic() - last_report >= 0.25:
+                    progress(0, f"{label}: {len(files)} Dateien gefunden – {current_path}")
+                    last_report = monotonic()
                 for directory_name in dir_names:
                     relative = relative_dir / directory_name
                     if _is_selected(relative.parts, selections):
@@ -174,6 +204,9 @@ class SyncEngine:
                     except OSError:
                         continue
                     files[str(relative)] = FileRecord(path, file_stat.st_size, file_stat.st_mtime_ns)
+                    if progress and monotonic() - last_report >= 0.25:
+                        progress(0, f"{label}: {len(files)} Dateien gefunden – {current_path}")
+                        last_report = monotonic()
         except OSError as exc:
             raise UnavailablePathError(f"Ordner kann nicht gelesen werden: {root}") from exc
         return files, directories
@@ -295,6 +328,31 @@ class SyncEngine:
         }
 
 
+def _is_directory_link(path: Path) -> bool:
+    """Erkennt auch Windows-Junctions unter Python 3.11 ohne Path.is_junction."""
+    metadata = path.lstat()
+    return stat.S_ISLNK(metadata.st_mode) or getattr(metadata, "st_reparse_tag", 0) == stat.IO_REPARSE_TAG_MOUNT_POINT
+
+
+def _blocked_path(operation: _Operation, exc: OSError | shutil.Error) -> Path | None:
+    """Ordnet auch Windows-Kopierfehler ohne Dateinamen der gesperrten Seite zu."""
+    winerror = getattr(exc, "winerror", None)
+    if winerror not in {5, 32, 33}:
+        return None
+    reported = (exc.filename2 or exc.filename) if isinstance(exc, OSError) else None
+    if reported and winerror in {32, 33}:
+        return Path(reported)
+    candidates = [Path(reported)] if reported else []
+    candidates.extend(path for path in (operation.source, operation.target) if path is not None)
+    for path in dict.fromkeys(candidates):
+        if is_file_locked(path):
+            return path
+    # Eine inzwischen freigegebene Datei beim nächsten Lauf erneut versuchen.
+    if winerror in {32, 33}:
+        return operation.source or operation.target
+    return None
+
+
 def _atomic_copy(source: Path, target: Path) -> None:
     temporary = target.with_name(f".{target.name}.syncvito.tmp")
     try:

src/syncvito/updater.py

@@ -116,6 +116,7 @@ def _start_installer_after_exit(
     arguments: list[str],
     wait_pids: Iterable[int],
     bootstrap_log_path: Path,
+    application_path: Path,
 ) -> None:
     """Startet Inno Setup erst nach dem Ende aller PyInstaller-Prozesse."""
     if os.name != "nt":
@@ -129,43 +130,71 @@ def _start_installer_after_exit(
 
     normalized_pids = sorted({int(pid) for pid in wait_pids if int(pid) > 0})
     pid_list = ", ".join(str(pid) for pid in normalized_pids)
-    setup_arguments = ", ".join(_powershell_literal(argument) for argument in arguments)
+    setup_arguments = _powershell_literal(subprocess.list2cmdline(arguments))
+    result_path = bootstrap_log_path.parent / "update-result.json"
     script = f"""
 $ErrorActionPreference = 'Stop'
 $bootstrapLog = {_powershell_literal(bootstrap_log_path)}
+$applicationPath = {_powershell_literal(application_path)}
+$resultPath = {_powershell_literal(result_path)}
+$setupExitCode = $null
+function Write-UpdateResult([bool]$success, [string]$message) {{
+    $result = @{{ success = $success; message = $message; exit_code = $setupExitCode }} | ConvertTo-Json
+    [System.IO.File]::WriteAllText($resultPath, $result, [System.Text.UTF8Encoding]::new($false))
+}}
 try {{
     [System.IO.File]::WriteAllText(
         $bootstrapLog,
         ((Get-Date).ToString('o') + ' Warte auf SyncVito-Prozesse: {pid_list}' + [Environment]::NewLine)
     )
-    foreach ($processId in @({pid_list})) {{
     $deadline = [DateTime]::UtcNow.AddMinutes(2)
-        while (Get-Process -Id $processId -ErrorAction SilentlyContinue) {{
+    $lastWaiting = ''
+    while ($true) {{
+        $waiting = @(
+            foreach ($processId in @({pid_list})) {{
+                Get-Process -Id $processId -ErrorAction SilentlyContinue
+            }}
+            Get-Process -Name ([System.IO.Path]::GetFileNameWithoutExtension($applicationPath)) -ErrorAction SilentlyContinue |
+                Where-Object {{ -not $_.Path -or $_.Path -eq $applicationPath }}
+        )
+        if ($waiting.Count -eq 0) {{ break }}
+        $waitingIds = ($waiting.Id | Sort-Object -Unique) -join ', '
+        if ($waitingIds -ne $lastWaiting) {{
+            [System.IO.File]::AppendAllText($bootstrapLog, 'Noch aktiv: ' + $waitingIds + [Environment]::NewLine)
+            $lastWaiting = $waitingIds
+        }}
         if ([DateTime]::UtcNow -ge $deadline) {{
-                throw "SyncVito-Prozess $processId wurde nicht innerhalb von zwei Minuten beendet."
+            throw "SyncVito ist noch aktiv (Prozesse: $waitingIds). Bitte alle Instanzen im Infobereich ueber Beenden schliessen und das Update erneut starten."
         }}
         Start-Sleep -Milliseconds 200
     }}
-    }}
     [System.IO.File]::AppendAllText(
         $bootstrapLog,
         ((Get-Date).ToString('o') + ' Starte verifizierten Installer.' + [Environment]::NewLine)
     )
     $env:PYINSTALLER_RESET_ENVIRONMENT = '1'
-    $setupArguments = @({setup_arguments})
-    & {_powershell_literal(installer_path)} @setupArguments
-    $setupExitCode = $LASTEXITCODE
+    $setupArguments = {setup_arguments}
+    $setup = Start-Process -FilePath {_powershell_literal(installer_path)} -ArgumentList $setupArguments -PassThru -WindowStyle Hidden
+    # Nur auf Setup warten: -Wait wuerde auch den neu gestarteten Client abwarten.
+    $setup.WaitForExit()
+    $setupExitCode = $setup.ExitCode
     [System.IO.File]::AppendAllText(
         $bootstrapLog,
         ((Get-Date).ToString('o') + ' Installer-Exitcode: ' + $setupExitCode + [Environment]::NewLine)
     )
+    if ($null -eq $setupExitCode -or $setupExitCode -ne 0) {{
+        throw "Installation abgebrochen (Exitcode: $setupExitCode). Details stehen im Inno-Setup-Protokoll im Update-Verzeichnis."
+    }}
+    Write-UpdateResult $true ''
     exit $setupExitCode
 }}
 catch {{
+    $failureMessage = $_.Exception.Message
     [System.IO.File]::AppendAllText(
         $bootstrapLog,
         ((Get-Date).ToString('o') + ' Bootstrap-Fehler: ' + $_.Exception.Message + [Environment]::NewLine)
     )
+    Write-UpdateResult $false $failureMessage
     exit 1
 }}
 """
@@ -297,7 +326,11 @@ class GiteaUpdateService:
             raise UpdateInstallError("Updates können nur aus der installierten Windows-Version gestartet werden.")
         installer = installer_path.resolve()
         expected_name = f"SyncVitoSetup-{version}.exe"
-        if installer.parent != self.update_directory.resolve() or installer.name != expected_name or not installer.is_file():
+        if (
+            installer.parent != self.update_directory.resolve()
+            or installer.name != expected_name
+            or not installer.is_file()
+        ):
             raise UpdateInstallError("Der geprüfte Installer wurde nicht gefunden.")
 
         safe_version = re.sub(r"[^0-9A-Za-z._-]+", "_", version).strip("._") or "unknown"
@@ -317,10 +350,24 @@ class GiteaUpdateService:
             f"/LOG={setup_log}",
         ]
         try:
-            _start_installer_after_exit(installer, arguments, wait_pids, bootstrap_log)
+            _start_installer_after_exit(installer, arguments, wait_pids, bootstrap_log, current_executable)
         except (OSError, ValueError, UpdateError) as exc:
             raise UpdateInstallError(f"Die Installation konnte nicht gestartet werden: {exc}") from exc
 
+    def take_install_error(self) -> str | None:
+        """Liest das Ergebnis des externen Wächters einmalig; Protokolle bleiben erhalten."""
+        result_path = self.update_directory / "update-result.json"
+        try:
+            result = json.loads(result_path.read_text(encoding="utf-8"))
+            if not isinstance(result, dict) or not isinstance(result.get("success"), bool):
+                return None
+            result_path.unlink()
+        except (OSError, ValueError):
+            return None
+        if result["success"]:
+            return None
+        return str(result.get("message") or "Die Installation wurde nicht abgeschlossen.")
+
     def cleanup_installers(self) -> tuple[int, int]:
         """Entfernt ausschließlich von SyncVito verwaltete Setup-Dateien."""
         try:

tests/test_coordinator.py

@@ -0,0 +1,95 @@
+from pathlib import Path
+
+import pytest
+from PyQt6.QtWidgets import QApplication
+
+from syncvito.config_store import ConfigStore
+from syncvito.coordinator import SyncCoordinator
+from syncvito.models import AppConfig, SyncTask, TaskRuntimeState
+from syncvito.sync_engine import BlockedFile, SyncResult
+
+
+@pytest.fixture
+def coordinator(tmp_path: Path):
+    application = QApplication.instance() or QApplication([])
+    task = SyncTask(name="AppData", source=str(tmp_path / "source"), target=str(tmp_path / "target"))
+    coordinator = SyncCoordinator(AppConfig(tasks=[task]), ConfigStore(tmp_path / "config.json"))
+    yield coordinator
+    coordinator._schedule_timer.stop()
+    coordinator._retry_timer.stop()
+    coordinator.stop()
+    assert application is not None
+
+
+def test_many_locks_have_compact_banner_and_full_paths_in_log(coordinator: SyncCoordinator) -> None:
+    banners = []
+    logs = []
+    coordinator.lock_changed.connect(banners.append)
+    coordinator.log_created.connect(lambda *entry: logs.append(entry))
+    blocked = [BlockedFile(Path(f"AppData/Programm{index}/Cookies")) for index in range(300)]
+    task = coordinator.config.tasks[0]
+
+    coordinator._on_finished(task.id, SyncResult(copied=123, blocked=blocked))
+
+    assert len(banners[-1]) < 400
+    assert "123 kopiert" in banners[-1]
+    assert "300 Dateien gesperrt" in banners[-1]
+    assert "unvollständig" in banners[-1]
+    assert len(logs) == 301
+    assert str(blocked[-1].path) in logs[-1][2]
+    assert coordinator.task_state(task.id) is TaskRuntimeState.WAITING_FOR_RELEASE
+
+    coordinator._on_finished(task.id, SyncResult(copied=300))
+    assert banners[-1] == ""
+    assert task.id not in coordinator._retry_tasks
+    assert coordinator.task_state(task.id) is TaskRuntimeState.ACTIVE
+
+
+def test_errors_are_visible_even_when_other_files_are_locked(coordinator: SyncCoordinator) -> None:
+    logs = []
+    coordinator.log_created.connect(lambda *entry: logs.append(entry))
+    task = coordinator.config.tasks[0]
+    coordinator._on_finished(task.id, SyncResult(blocked=[BlockedFile(Path("Cookies"))], errors=["Zugriff verweigert"]))
+    assert coordinator.task_state(task.id) is TaskRuntimeState.ERROR
+    assert any(level == "Fehler" and detail == "Zugriff verweigert" for _, level, detail in logs)
+
+
+@pytest.mark.parametrize("all_locked", [False, True])
+def test_retry_can_run_after_partial_release(
+    coordinator: SyncCoordinator, monkeypatch: pytest.MonkeyPatch, all_locked: bool
+) -> None:
+    task = coordinator.config.tasks[0]
+    coordinator._retry_tasks[task.id] = [Path("dauerhaft"), Path("freigegeben")]
+    queued = []
+    monkeypatch.setattr(coordinator, "enqueue", queued.append)
+    monkeypatch.setattr("syncvito.coordinator.is_file_locked", lambda path: all_locked or path.name == "dauerhaft")
+    coordinator._check_retries()
+    assert queued == ([] if all_locked else [task.id])
+
+
+def test_retry_queues_all_ready_tasks(coordinator: SyncCoordinator, monkeypatch: pytest.MonkeyPatch) -> None:
+    coordinator._retry_tasks = {"first": [], "second": []}
+    queued = []
+    monkeypatch.setattr(coordinator, "enqueue", queued.append)
+    coordinator._check_retries()
+    assert queued == ["first", "second"]
+
+
+def test_start_resets_stale_progress_before_worker_starts(
+    coordinator: SyncCoordinator, monkeypatch: pytest.MonkeyPatch
+) -> None:
+    from types import SimpleNamespace
+
+    messages = []
+    workers = []
+    coordinator.progress_changed.connect(lambda *entry: messages.append(entry))
+
+    def start(worker) -> None:
+        assert messages and messages[-1][0] == 0
+        assert "AppData" in messages[-1][1]
+        workers.append(worker)
+
+    monkeypatch.setattr(coordinator, "pool", SimpleNamespace(start=start))
+    coordinator.enqueue(coordinator.config.tasks[0].id)
+    assert len(workers) == 1
+    assert coordinator.current_overall_status() == ("active", "Synchronisierung läuft")

tests/test_file_locks.py

@@ -0,0 +1,74 @@
+import ctypes
+import os
+from contextlib import contextmanager
+from ctypes import wintypes
+from pathlib import Path
+
+import pytest
+
+from syncvito.file_locks import is_file_locked
+from syncvito.models import SyncTask
+from syncvito.state_store import StateStore
+from syncvito.sync_engine import SyncEngine
+
+pytestmark = pytest.mark.skipif(os.name != "nt", reason="Windows-Dateisperren")
+
+
+@contextmanager
+def exclusive_lock(path: Path):
+    kernel32 = ctypes.WinDLL("kernel32", use_last_error=True)
+    kernel32.CreateFileW.argtypes = [
+        wintypes.LPCWSTR,
+        wintypes.DWORD,
+        wintypes.DWORD,
+        ctypes.c_void_p,
+        wintypes.DWORD,
+        wintypes.DWORD,
+        wintypes.HANDLE,
+    ]
+    kernel32.CreateFileW.restype = wintypes.HANDLE
+    kernel32.CloseHandle.argtypes = [wintypes.HANDLE]
+    kernel32.CloseHandle.restype = wintypes.BOOL
+    handle = kernel32.CreateFileW(str(path), 0x80000000, 0, None, 3, 0x80, None)
+    assert handle != ctypes.c_void_p(-1).value, ctypes.get_last_error()
+    try:
+        yield
+    finally:
+        assert kernel32.CloseHandle(handle)
+
+
+def test_detects_real_lock_and_release(tmp_path: Path) -> None:
+    path = tmp_path / "gesperrt.txt"
+    path.write_text("Inhalt")
+    assert not is_file_locked(path)
+    with exclusive_lock(path):
+        assert is_file_locked(path)
+    assert not is_file_locked(path)
+    assert not is_file_locked(tmp_path / "fehlt.txt")
+
+
+@pytest.mark.parametrize("locked_side", ["source", "target"])
+def test_sync_preserves_backup_and_continues_past_lock(tmp_path: Path, locked_side: str) -> None:
+    source = tmp_path / "source"
+    target = tmp_path / "target"
+    source.mkdir()
+    target.mkdir()
+    (source / "a.txt").write_text("neue Version")
+    (target / "a.txt").write_text("alt")
+    (source / "b.txt").write_text("lesbar")
+    locked_path = tmp_path / locked_side / "a.txt"
+    task = SyncTask(name="AppData", source=str(source), target=str(target))
+    engine = SyncEngine(StateStore(tmp_path / "state.json"))
+
+    with exclusive_lock(locked_path):
+        result = engine.synchronize(task)
+        assert not result.successful
+        assert [item.path for item in result.blocked] == [locked_path]
+        assert not result.errors
+        assert result.copied == 1
+        assert (target / "b.txt").read_text() == "lesbar"
+
+    assert (target / "a.txt").read_text() == "alt"
+    assert not list(target.glob("*.tmp"))
+    assert engine.synchronize(task).successful
+    assert (target / "a.txt").read_text() == "neue Version"

tests/test_progress_layout.py

@@ -0,0 +1,28 @@
+from types import SimpleNamespace
+
+from PyQt6.QtWidgets import QApplication
+
+from syncvito.main_window import PROGRESS_BAR_WIDTH, PROGRESS_TEXT_WIDTH, MainWindow
+
+
+def test_progress_widgets_keep_fixed_widths_for_long_paths() -> None:
+    application = QApplication.instance() or QApplication([])
+    owner = SimpleNamespace()
+    dock = MainWindow._build_progress_dock(owner)
+    dock.resize(900, 66)
+    dock.show()
+    application.processEvents()
+    bar_x = owner.progress_bar.x()
+    long_path = "Kopieren: " + "sehr-langer-ordner\\" * 20 + "wichtige-datei.ini"
+
+    owner.progress_text.setText(long_path)
+    application.processEvents()
+
+    assert owner.progress_text.width() == PROGRESS_TEXT_WIDTH
+    assert owner.progress_bar.width() == PROGRESS_BAR_WIDTH
+    assert owner.progress_bar.x() == bar_x
+    assert owner.progress_text.text() != long_path
+    assert "…" in owner.progress_text.text()
+    assert owner.progress_text.toolTip() == long_path
+    assert owner.progress_text.accessibleName() == long_path
+    dock.close()

tests/test_runtime_status.py

@@ -14,7 +14,14 @@ def test_healthy_active_tasks_are_green() -> None:
 
 def test_waiting_lock_has_priority_over_active_task() -> None:
     states = [TaskRuntimeState.ACTIVE, TaskRuntimeState.WAITING_FOR_RELEASE]
-    assert derive_overall_status(states, globally_paused=False) == ("error", "Wartet auf Dateifreigabe")
+    assert derive_overall_status(states, globally_paused=False) == ("error", "Unvollständig – Dateien gesperrt")
+
+
+def test_waiting_task_does_not_hide_running_sync() -> None:
+    assert derive_overall_status([TaskRuntimeState.WAITING_FOR_RELEASE], False, running=True) == (
+        "error",
+        "Synchronisierung läuft",
+    )
 
 
 def test_error_has_highest_priority() -> None:

tests/test_sync_engine.py

@@ -1,6 +1,8 @@
 import os
 from pathlib import Path
 
+import pytest
+
 from syncvito.models import ConflictMode, DeleteMode, SyncDirection, SyncTask
 from syncvito.state_store import StateStore
 from syncvito.sync_engine import SyncEngine
@@ -10,6 +12,103 @@ def _engine(tmp_path: Path) -> SyncEngine:
     return SyncEngine(StateStore(tmp_path / "state.json"))
 
 
+def test_progress_reports_scan_before_copying(tmp_path: Path, monkeypatch: pytest.MonkeyPatch) -> None:
+    from itertools import count
+
+    source = tmp_path / "source"
+    target = tmp_path / "target"
+    source.mkdir()
+    (source / "datei.txt").write_text("Inhalt")
+    ticks = count()
+    monkeypatch.setattr("syncvito.sync_engine.monotonic", lambda: float(next(ticks)))
+    messages = []
+
+    def progress(value: int, detail: str) -> None:
+        messages.append((value, detail))
+        if "eingelesen" in detail or "Dateien gefunden" in detail:
+            assert value == 0
+            assert not (target / "datei.txt").exists()
+
+    result = _engine(tmp_path).synchronize(SyncTask(name="Test", source=str(source), target=str(target)), progress)
+
+    assert result.successful
+    assert "Ordner werden geprüft" in messages[0][1]
+    assert any("Quelle wird eingelesen" in detail for _, detail in messages)
+    assert any("Ziel wird eingelesen" in detail for _, detail in messages)
+    assert any("1 Dateien gefunden" in detail for _, detail in messages)
+    assert messages[-1][0] == 100
+
+
+@pytest.mark.skipif(os.name != "nt", reason="Windows-Junctions")
+def test_inventory_does_not_follow_windows_junctions(tmp_path: Path) -> None:
+    import _winapi
+
+    source = tmp_path / "source"
+    outside = tmp_path / "outside"
+    source.mkdir()
+    outside.mkdir()
+    (outside / "extern.txt").write_text("Nicht synchronisieren")
+    (source / "lokal.txt").write_text("Synchronisieren")
+    junction = source / "verknuepfung"
+    _winapi.CreateJunction(str(outside), str(junction))
+    try:
+        files, directories = SyncEngine._inventory(source, [])
+        assert set(files) == {"lokal.txt"}
+        assert "verknuepfung" not in directories
+    finally:
+        junction.rmdir()
+
+
+def test_inventory_prunes_unselected_subtrees(tmp_path: Path, monkeypatch: pytest.MonkeyPatch) -> None:
+    source = tmp_path / "source"
+    (source / "auswahl").mkdir(parents=True)
+    (source / "ignorieren" / "unterordner").mkdir(parents=True)
+    (source / "auswahl" / "ja.txt").write_text("ja")
+    visited = []
+    original_walk = os.walk
+
+    def walk(*args, **kwargs):
+        for entry in original_walk(*args, **kwargs):
+            visited.append(Path(entry[0]))
+            yield entry
+
+    monkeypatch.setattr("syncvito.sync_engine.os.walk", walk)
+    files, _ = SyncEngine._inventory(source, ["auswahl"])
+    assert set(files) == {str(Path("auswahl/ja.txt"))}
+    assert visited == [source, source / "auswahl"]
+
+
+@pytest.mark.parametrize("winerror", [None, 5])
+def test_access_denied_is_not_reported_as_file_lock(
+    tmp_path: Path, monkeypatch: pytest.MonkeyPatch, winerror: int | None
+) -> None:
+    source = tmp_path / "source"
+    target = tmp_path / "target"
+    source.mkdir()
+    (source / "geschuetzt.txt").write_text("geschützt")
+    (source / "lesbar.txt").write_text("lesbar")
+    from syncvito import sync_engine
+
+    copy = sync_engine._atomic_copy
+
+    def copy_with_denied_file(source_path: Path, target_path: Path) -> None:
+        if source_path.name == "geschuetzt.txt":
+            error = PermissionError(13, "Zugriff verweigert", str(source_path))
+            if winerror is not None:
+                error.winerror = winerror
+            raise error
+        copy(source_path, target_path)
+
+    monkeypatch.setattr(sync_engine, "_atomic_copy", copy_with_denied_file)
+    result = _engine(tmp_path).synchronize(SyncTask(name="AppData", source=str(source), target=str(target)))
+
+    assert not result.successful
+    assert not result.blocked
+    assert len(result.errors) == 1
+    assert str(source / "geschuetzt.txt") in result.errors[0]
+    assert (target / "lesbar.txt").read_text() == "lesbar"
+
+
 def test_one_way_copy_and_mirror_delete(tmp_path: Path) -> None:
     source = tmp_path / "source"
     target = tmp_path / "target"

tests/test_update_watcher.py

@@ -0,0 +1,161 @@
+"""Führt den echten PowerShell-Wächter mit harmlosen Testprogrammen aus."""
+
+import base64
+import json
+import os
+import shutil
+import subprocess
+import time
+from pathlib import Path
+
+import pytest
+
+from syncvito import updater
+
+pytestmark = pytest.mark.skipif(os.name != "nt", reason="Windows-Prozesslebenszyklus")
+
+
+def wait_for_file(path: Path, timeout: float = 15) -> None:
+    deadline = time.monotonic() + timeout
+    while not path.exists():
+        if time.monotonic() > deadline:
+            pytest.fail(f"Testprozess hat keine Datei geschrieben: {path}")
+        time.sleep(0.05)
+
+
+@pytest.fixture(scope="module")
+def helper_exe(tmp_path_factory: pytest.TempPathFactory) -> Path:
+    root = tmp_path_factory.mktemp("watcher-helper")
+    source = root / "helper.cs"
+    source.write_text(
+        """
+using System;
+using System.IO;
+using System.Threading;
+class Helper {
+    static int Main(string[] args) {
+        File.WriteAllLines(args[0], args);
+        var deadline = DateTime.UtcNow.AddSeconds(30);
+        while (!File.Exists(args[1])) {
+            if (DateTime.UtcNow > deadline) return 99;
+            Thread.Sleep(50);
+        }
+        return Int32.Parse(args[2]);
+    }
+}
+""",
+        encoding="utf-8",
+    )
+    compiler = Path(os.environ.get("SYSTEMROOT", r"C:\Windows")) / "Microsoft.NET/Framework64/v4.0.30319/csc.exe"
+    if not compiler.exists():
+        pytest.skip("Windows-.NET-Compiler für Testprogramm nicht vorhanden")
+    executable = root / "SyncVitoWatcherTest.exe"
+    subprocess.run(
+        [str(compiler), "/nologo", "/target:winexe", f"/out:{executable}", str(source)],
+        check=True,
+        capture_output=True,
+        timeout=30,
+    )
+    return executable
+
+
+@pytest.mark.parametrize("exit_code", [0, 5])
+def test_watcher_waits_for_all_instances_and_real_setup_exit(
+    helper_exe: Path, tmp_path: Path, monkeypatch: pytest.MonkeyPatch, exit_code: int
+) -> None:
+    root = tmp_path / "Ordner mit Leerzeichen und 'Apostroph'"
+    root.mkdir()
+    installer = root / "SetupTest.exe"
+    shutil.copy2(helper_exe, installer)
+    unrelated_dir = root / "anderer Installationspfad"
+    unrelated_dir.mkdir()
+    unrelated_exe = unrelated_dir / helper_exe.name
+    shutil.copy2(helper_exe, unrelated_exe)
+    children = []
+    releases = []
+
+    def start_client(exe: Path, name: str) -> subprocess.Popen:
+        ready = root / f"{name}.ready"
+        release = root / f"{name}.release"
+        releases.append(release)
+        process = subprocess.Popen([str(exe), str(ready), str(release), "0"])
+        children.append(process)
+        wait_for_file(ready)
+        return process
+
+    def launch_watcher(executable: str, arguments: list[str]) -> None:
+        children.append(subprocess.Popen([executable, *arguments], creationflags=subprocess.CREATE_NO_WINDOW))
+
+    try:
+        parent = start_client(helper_exe, "parent")
+        extra = start_client(helper_exe, "extra")
+        unrelated = start_client(unrelated_exe, "unrelated")
+        monkeypatch.setattr(updater, "_start_detached", launch_watcher)
+        output = root / "setup.arguments"
+        setup_release = root / "setup.release"
+        releases.append(setup_release)
+        log = root / "bootstrap.log"
+        arguments = [str(output), str(setup_release), str(exit_code), f"/DIR={root}", f"/LOG={root / 'setup.log'}"]
+        updater._start_installer_after_exit(installer, arguments, [parent.pid], log, helper_exe)
+        watcher = children[-1]
+        wait_for_file(log)
+        assert not output.exists()
+        releases[0].touch()
+        parent.wait(timeout=10)
+        time.sleep(0.5)
+        assert not output.exists(), "Weitere Instanz wurde nicht abgewartet"
+        releases[1].touch()
+        extra.wait(timeout=10)
+        wait_for_file(output)
+        assert unrelated.poll() is None, "Anderer Installationspfad darf weiterlaufen"
+        assert output.read_text(encoding="utf-8-sig").splitlines() == arguments
+        assert watcher.poll() is None, "Wächter muss auf Setup warten"
+        assert not (root / "update-result.json").exists()
+        setup_release.touch()
+        assert watcher.wait(timeout=15) == (0 if exit_code == 0 else 1)
+        receipt = json.loads((root / "update-result.json").read_text(encoding="utf-8"))
+        assert receipt["success"] is (exit_code == 0)
+        assert receipt["exit_code"] == exit_code
+        assert f"Installer-Exitcode: {exit_code}" in log.read_text(encoding="utf-8-sig")
+    finally:
+        for release in releases:
+            release.touch()
+        for child in children:
+            try:
+                child.wait(timeout=10)
+            except subprocess.TimeoutExpired:
+                child.kill()
+                child.wait(timeout=5)
+
+
+def test_watcher_reports_timeout_without_starting_installer(
+    helper_exe: Path, tmp_path: Path, monkeypatch: pytest.MonkeyPatch
+) -> None:
+    ready = tmp_path / "client.ready"
+    release = tmp_path / "client.release"
+    log = tmp_path / "bootstrap.log"
+    client = subprocess.Popen([str(helper_exe), str(ready), str(release), "0"])
+    watchers = []
+
+    def launch_with_short_deadline(executable: str, arguments: list[str]) -> None:
+        script = base64.b64decode(arguments[-1]).decode("utf-16-le")
+        script = script.replace("AddMinutes(2)", "AddMilliseconds(400)")
+        arguments[-1] = base64.b64encode(script.encode("utf-16-le")).decode("ascii")
+        watchers.append(subprocess.Popen([executable, *arguments], creationflags=subprocess.CREATE_NO_WINDOW))
+
+    try:
+        wait_for_file(ready)
+        monkeypatch.setattr(updater, "_start_detached", launch_with_short_deadline)
+        updater._start_installer_after_exit(tmp_path / "not-started.exe", ["/VERYSILENT"], [], log, helper_exe)
+        assert watchers[0].wait(timeout=15) == 1
+        receipt = json.loads((tmp_path / "update-result.json").read_text(encoding="utf-8"))
+        assert not receipt["success"]
+        assert str(client.pid) in receipt["message"]
+        assert "Beenden" in receipt["message"]
+        assert "Starte verifizierten Installer" not in log.read_text(encoding="utf-8-sig")
+        assert client.poll() is None
+    finally:
+        release.touch()
+        client.wait(timeout=10)
+        for watcher in watchers:
+            watcher.wait(timeout=10)

tests/test_updater.py

@@ -1,5 +1,6 @@
 import base64
 import hashlib
+import json
 import os
 from pathlib import Path
 
@@ -154,15 +155,37 @@ def test_update_watcher_waits_before_installer(monkeypatch: pytest.MonkeyPatch,
     powershell = Path(os.environ.get("SYSTEMROOT", r"C:\Windows")) / "System32/WindowsPowerShell/v1.0/powershell.exe"
     monkeypatch.setattr(Path, "is_file", lambda self: self == powershell)
 
-    updater._start_installer_after_exit(installer, ["/VERYSILENT"], [222, 111], bootstrap_log)
+    updater._start_installer_after_exit(
+        installer, ["/VERYSILENT"], [222, 111], bootstrap_log, tmp_path / "SyncVito.exe"
+    )
 
     arguments = captured["arguments"]
     assert isinstance(arguments, list)
     encoded = arguments[arguments.index("-EncodedCommand") + 1]
     script = base64.b64decode(encoded).decode("utf-16-le")
     assert "foreach ($processId in @(111, 222))" in script
-    assert script.index("while (Get-Process") < script.index(str(installer))
+    assert script.index("while ($true)") < script.index(str(installer))
     reset_environment = "$env:PYINSTALLER_RESET_ENVIRONMENT = '1'"
     assert reset_environment in script
-    assert script.index(reset_environment) < script.index(f"& '{installer}'")
+    assert script.index(reset_environment) < script.index("$setup = Start-Process")
     assert "'/VERYSILENT'" in script
+
+
+@pytest.mark.parametrize("success", [False, True])
+def test_installer_result_is_consumed_but_logs_are_kept(tmp_path: Path, success: bool) -> None:
+    service = GiteaUpdateService("1.0.7", update_directory=tmp_path)
+    receipt = tmp_path / "update-result.json"
+    receipt.write_text(json.dumps({"success": success, "message": "Installation abgebrochen"}), encoding="utf-8")
+    log = tmp_path / "SyncVitoSetup-1.0.8.log"
+    log.write_text("Diagnose")
+    assert service.take_install_error() == (None if success else "Installation abgebrochen")
+    assert service.take_install_error() is None
+    assert log.read_text() == "Diagnose"
+
+
+def test_incomplete_installer_result_can_be_read_later(tmp_path: Path) -> None:
+    service = GiteaUpdateService("1.0.7", update_directory=tmp_path)
+    receipt = tmp_path / "update-result.json"
+    receipt.write_text('{"success":', encoding="utf-8")
+    assert service.take_install_error() is None
+    assert receipt.exists()

version.txt

@@ -1 +1 @@
-1.0.5
+1.0.9